Preparation of Titania Nanosheet-Precipitated Coatings on Glass Substrates by Treating SiO2-TiO2 Gel Films with Hot Water Under Vibrations

Titania nanosheet-precipitated coatings have been prepared by treating SiO₂-TiO₂ gel films on glass substrates with hot water at 90°C under vibration. Longitudinal vibrations at about 6 Hz during the treatment enhanced the formation of titania nanosheet. The titania nanosheet consisted of several layers with a spacing of about 0.6 nm and was identified as hydrated titania with a lepidocrocite-type structure. The morphology of the titania nanosheet-precipitated coatings is probably achieved by lowering of the concentration of hydrolyzed titania species at the surface due to rapid water flow driven by the vibrations. The coatings were transparent in the visible range and showed high photocatalytic activity and antifogging property.     

Effect of included guest molecules on the normal state conductivity and superconductivity of beta''-(ET)(4)[(H(3)O)Ga(C(2)O(4))(3)].G (G = pyridine,nitrobenzene)

Normal state conductivity and superconductivity together with bulk magnetic susceptibility and magnetization measurements have been measured for two molecular charge-transfer salts: beta' '-(ET)4[(H3O)Ga(C2O4)3]G (ET = bis(ethylenedithio)tetrathiafulvalene, G = pyridine for compound I and nitrobenzene for compound II). With the exception of the included guest molecules (G) the crystal structures are almost identical. Both show minima in their electrical transport at 130 K for I and at 160 K for II, but at lower temperatures their behaviors differ markedly. The resistance of I reaches a maximum at 50 K with a further small peak at 2 K and possible superconductivity only below 2 K, whereas that of II increases continuously down to 7.5 K, where an abrupt transition to a superconducting state occurs.     

Palladium-catalyzed oxidation of alcohols via their allyl carbonates under neutral conditions

Treatment of alkyl allyl carbonates derived from various alcohols with a palladium catalyst in MeCN affords ketones and aldehydes in high yields. This new method of oxidation of alcohols can be applied to various alcohols except simple primary alcohols.     

Radical [3 + 2] cycloaddition reaction with various alkenes using iodomethylcyclopropane derivatives as new homoallyl radical precursors

Radical iodine atom transfer [3 + 2] cycloaddition with various alkenes using dimethyl 2-(iodomethyl)cyclopropane-1,1-dicarboxylate and 1,1-bis(phenylsulfonyl)-2-(iodomethyl)cyclopropane as new precursors of a homoallyl radical species smoothly proceeds to give functionalized cyclopentane derivatives in good yields.     

Production of polyacrylonitrile particles by precipitation polymerization in supercritical carbon dioxide

Polyacrylonitrile particles were produced by precipitation polymerization of acrylonitrile (AN) without any colloidal stabilizer in supercritical carbon dioxide as a polymerization medium at about 30 MPa for 24 h at 65 °C at different initiator concentrations (0.8–45.2 mmol/l) and at different AN concentrations (10–40% w/v). An increase in the initiator concentration led to increases in the conversion and in the degree of coagulation and to a decrease in the molecular weight. At AN concentration of 20% w/v, micron-sized, relatively monodisperse polyacrylonitrile particles with clean and uneven surfaces were produced.     

Gas chromatography of hydrocarbons using packed liquid chromatographic capillary columns

Capillary columns of 0.3-0.5 mm i.d. packed with 3- to 30-μm silica-based stationary phases for liquid chromatography were used for gas chromatographic separation of hydrocarbons. Column efficiencies were evaluated for various commercially available packing material. The best column efficiency was achieved with 5-μm octadecyl group bonded silica gel, the surface of which was coated with a poly (dimethylsiloxane) film. The 30-cm column produced 11,000 theoretical plates.     

Palladium-catalyzed reaction of allyl carbamates; allylation of carbonucleophiles,and protection-deprotection of amines

Allylation of carbonucleophiles with allylic carbamates under neutral conditions has been studied. The C-allylation of carbonucleophile is competitive with the N-allylation of amines, and the structure of amines is crucial for the selectivity. Bulky secondary amines gave the best results. Also a new method of protection-deprotection of amines as carbamates has been developed. Smooth deprotection is possible by the palladium-catalyzed reaction of allyl carbamates with formic acid. This method is particulary useful for primary amines, including optically active amino acids.     

Fe3O4-LiMo3Se3 nanoparticle clusters as superparamagnetic nanocompasses

A scaleable chemical approach to functional nanoscale analogues of the magnetic compasses in magnetotactic bacteria is described. LiMo(3)Se(3)-Fe(3)O(4) nanowire-nanoparticle composites were synthesized by a reaction of 3-iodopropionic acid treated LiMo(3)Se(3) nanowire bundles with oleic acid-stabilized Fe(3)O(4) nanoparticles of 2.8, 5.3, and 12.5 nm size in tetrahydrofuran. Transmission electron micrographs show that the composite consists of Fe(3)O(4) nanoparticles attached to the surfaces of the 4-6 nm thick nanowire bundles. UV/vis spectra reveal absorptions from the nanowire (506 nm) and magnetite components (280-450 nm), and IR spectra show characteristic bands for the propionic acid linkers and for the residual oleic acid ligands on the magnetite particles. In the presence of excess oleic acid, the nanocomposites undergo rapid disassembly, suggesting that Fe(3)O(4) nanoparticles are bonded to nanowires via carboxylate groups from the linkers. Ultrasonication of a dispersion of the composite in THF produces individual LiMo(3)Se(3)-Fe(3)O(4) clusters, which are 340 +/- 107 nm long and 20 +/- 5 nm thick, depending on the sonication time and Fe(3)O(4) nanoparticle size. Field cooled and zero-field cooled magnetization measurements reveal that the blocking temperature (T(B) = 100 K) of the clusters with 5.3 nm Fe(3)O(4) is increased as compared to the free nanoparticles (T(B) = 30 K). Directional dipolar interactions in the clusters lead to magnetic anisotropy, which makes it possible to align the clusters in a magnetic field (900 Oe).     

Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.